Two ways from one sketch
From "New design" choose "📷 From a sketch", upload a photo of your drawing and say whether it is a room or a piece (or let it decide).
1. The AI reads it
It reads the written numbers — Arabic digits too — where the door and window are and the pieces drawn, and shows a review screen: your sketch on one side and what it understood on the other. Every number can be corrected, and a note says what was unclear and estimated. Once you agree it becomes an ordinary design, with your sketch underneath.
2. Trace it yourself
The sketch goes under the plan and you size it by one known length: click the two ends of a wall, type its real length, and the whole sketch scales to it. Then place pieces exactly over it, with its transparency and position under your control.
For a good reading
- Write the numbers on the drawing, in centimetres.
- Write each piece's name inside its box, and mark the door and the window.
- Photograph the paper from above, in good light.
By subscription: uploading and tracing a sketch, and having the AI read it (one request from the AI quota).